TOHATSU TLDI MD 115A SERIES Service Manual page 167

5. Repositioning Crank Shaft Ass'y
Reposition crank shaft ass'y attached to cylinder by
bringing main bearing holes 1 to cylinder dowel pins 2.
Attempt to move main bearing and upper
bearing lightly to check that dowel pins are in the
bearing holes snugly.
6. Positioning Upper Bearing and Main Bearing
Bring knock hole of each bearing to dowel pin of
cylinder's journal areas.
Attempt to move each bearing lightly to check if
dowel pin is in the hole snugly.
Each bearing is provided with a black dot 3 on
the opposite side of knock hole to check the
location.
TLDI 115A 2007
1
2
5
3
5-45