Removing Cord Ass'y - TOHATSU TLDI MD 115A SERIES Service Manual

4) Removing Cord Ass'y

Removing ECU
1. Disconnect ECU connectors while pushing hook of ECU
connector and pull apart.
2. After removing top two ECU mount rubber bolts, remove
ECU by pulling it upward.
3. Disconnect air compressor water temperature sensor
connector while pushing hook of the connector.
4. Disconnect fuel injector connector while pushing hook of
the connector. Repeat this step for four cylinders.
5. Disconnect air injector connector while opening locks
located on both sides of the connector by using a bladed
screw driver. Repeat this step for four cylinders.
TLDI 115A 2007
5
5-21