Inspection Of Propeller Shaft Ass'y; Assembly Of Propeller Shaft Ass'y - TOHATSU TLDI MD 115A SERIES Service Manual

Lower Unit

13) Inspection of Propeller Shaft Ass'y

1. Check propeller shaft for bend, wear and damage.
Replace if necessary.
2. Measure propeller shaft runout.
Runout Limit :
0.05 mm (0.0020 in)
Check clutch dog b and push rod c for crack and wear.
3.
Replace if necessary.

14) Assembly of Propeller Shaft Ass'y

Attach spring 6, spring retainer 5, ball 2, push rod 1,
1.
clutch 7 and clutch pin 4 to propeller shaft.
· When attaching clutch, face the narrower claw
a to push rod side.
· Install clutch pin while applying preload to
push rod.
· Be careful not to allow ball to fly out by spring
tension.
6-20
a
a Supporting Points
c
b
3
7
6
5
2
1
4
3 Clutch Pin Snap
Do not reuse.
a
a
TLDI 115A 2007