Draining Fuel From Ffp Vapor Separator; Removing Vapor Separator - TOHATSU TLDI MD 115A SERIES Service Manual

Fuel System (TLDI)

3) Draining Fuel from FFP Vapor Separator

1. Decompress fuel and air pressures.
Compressed fuel and/or air may spurt if it
is not decompressed.
Loosen air vent screw 1, and then, drain screw 2 to
2.
drain fuel from vapor separator and collect it in a
container.
Disconnect hose 3 at vapor separator side to drain fuel
3.
from FFP and collect it in a container.

4) Removing Vapor Separator

Use the following steps to drain fuel from vapor
separator.
Loosen air vent screw 1 and then drain screw 2.
1.
Use rag to catch fuel that spills from the part 2
when it is loosened.
2. Pull out following hoses.
Vapor Exhaust Hose 3 : Vapor Separator
Vapor Return Hose 4
Fuel Inlet Hose 5
Use rag to catch fuel that spills from hose 4
when it is disconnected.
Remove following parts to remove vapor separator.
Bolts 6
Fuel Outlet Hose 7 : Vapor Separator → FFP
Use a container to catch fuel that spills from
hose 7 when it is disconnected.
4-26
WARNING
→ Throttle Body
: FFP → Vapor Separator
: Fuel Pump → Vapor Separator
: 2 pcs.
2
3
3
2
7
1
1
4
6
5
TLDI 115A 2007