Removing Propeller Shaft Housing Ass'y - TOHATSU TLDI MD 115A SERIES Service Manual

8) Removing Propeller Shaft Housing
Ass'y
Loosen and remove bolts 1.
1.
2. Use propeller shaft housing puller to pull out propeller
shaft housing to the position where O ring of the housing
can be removed.
Propeller Housing Puller Ass'y 2 :
P/N. 353-72252-0
3. Hold propeller shaft and remove propeller shaft housing
ass'y.
When pulling out propeller shaft housing ass'y,
remove clutch push rod and steel balls together
with the housing ass'y.
TLDI 115A 2007
1
2
3
3 Propeller Shaft Housing Ass'y
6
6-13