TOHATSU TLDI MD 115A SERIES Service Manual page 196

Lower Unit
Install bearing 7.
3.
Use a press to install new bearing to propeller shaft
housing.
Clean bearing installation face and apply gear
oil before installation.
Bearing Attachment 8 :
P/N. 3U1-99905-0
Driver Rod 1 :
P/N. 3AC-99702-0
Attach shim 0 used on the reverse (C) gear 9 to the
4.
gear.
Use press to install reverse (C) gear 9.
Clean reverse (C) gear bearing installation face
and apply gear oil before installation.
Bevel Gear Install Tool q :
P/N. 3B7-72719-0
When gear case, propeller shaft, bearing,
housing or reverse (C) gear is replaced,
measure the backlash and perform shim
adjustment.
6-18
CAUTION
7 Bearing
Do not reuse.
1
7 Bearing
Do not reuse.
q
9
7 Bearing
Do not reuse.
1
8
7
8
7
GEAR GEAR
GEAR
GEAR GEAR
GEAR
9
0
0
7
GEAR GEAR
GEAR
TLDI 115A 2007