Installation of an outboard motor at higher
position can cause the matters described below.
1) Lower steering torque
2) Higher top speed
3) More stable boat attitude
4) Propeller can easily run above water surface
(over-revs) during planning or when the boat
is heavily loaded.
a : Outboard installation height is the distance from the
boat's bottom to upper edge of outboard motor
transom bracket.
4) Hanging Outboard Motor
Use hanger installed on the engine.
5) Installation of Outboard Motor
1.
Put the outboard motor installation template on the
transom.
Align center line of template with center line of
transom accurately.
2.
Mark up the transom with four 13 mm (0.53 in) mounting
holes and drill.
Drill at right angle to transom surface to align
the transom holes with outboard motor's
transom bracket holes accurately.
TLDI 115A 2007
a
10
10-5