Inspection Of Drive Shaft; Inspection Of Pinion (B) Gear And Forward (A) Gea - TOHATSU MFS 4 Service Manual

21) Inspection of Drive Shaft

1. Check drive shaft for bend and wear or twisted splines.
Replace if necessary.
2. Measure drive shaft runout.
Runout Limit (Max) :
0.2 mm (0.008 in)
22) Inspection of Pinion (B) Gear and
Forward (A) Gear
1. Check pinion (B) gear, forward (A) gear, reverse (C) gear
teeth and clutch for crack and wear. Replace if necessary.
4st 4/5/6 2011
a
a Supporting Points
* *
) )
a
+ +
6
6-17