Instruction Diagram -1 - TOHATSU TLDI MD 115A SERIES Service Manual

Electrical Wiring Assembling Instruction Diagram -1
Attaching ground lead
Fix cord ass'y to cylinder
TPS
by using stay and band.
TPS 2
Be careful when
assembling.
(Connector Color :
Blue)
Run starter motor cord and oil level sensor cord
through the clamp and tie them.
Attaching ground lead
Use a tie to fix battery cord,
PTT cord and oil level sensor
cord to cord ass'y. (2 locations)
TPS 1
Be careful when assembling.
(Connector Color : Gray)
TLDI 115A 2007 11-7