Removing Lower Unit - TOHATSU TLDI MD 115A SERIES Service Manual

3) Removing Lower Unit

1. Shift the gear into forward (F) to set shift rod to upper
position.
2. Remove spring pin and disconnect shift rod.
· Disconnect shift rod at upper side of shift rod
joint 1.
· Use spring pin tool A 2 to remove spring pin.
· Do not reuse removed spring pin.
Spring Pin Tool A 2 :
P/N. 369-72217-0
3. Remove lower unit installation bolts, and pull lower unit
ass'y downward to remove.
Hold lower unit while removing it to prevent it
dropping on the floor.
Disconnect speedometer pipe 4 from the nipple before
4.
separating lower unit from the driveshaft housing.
TLDI 115A 2007
3
1
3 Spring Pin
Do not reuse.
UL
L
4
2
6
6-9