List Of Special Tool - TOHATSU TLDI MD 115A SERIES Service Manual

Service Information

3) List of Special Tool

Clutch Pin Snap Tool
P/N. 345-72229-0
Attaching clutch pin
Thickness Gauge
P/N. 353-72251-0
Measuring gaps
Bevel Gear Bearing Puller Ass'y
P/N. 3B7-72755-0
Removing forward (A) gear bearing
outer race
Slide Hammer Kit
P/N. 3AC-99080-0
Removing forward (A) gear
bearing outer race
1-6
Power Head Stand
P/N. 353-72247-1
Holding power head when disassembling or
assembling power head
Propeller Shaft Housing Puller Ass'y
P/N. 353-72252-0
Removing propeller shaft
housing
Tachometer
P/N. 3AC-99010-0
Measuring engine revolution
speed
ø100 x ø79.5 x ø51.5 x ø61.5
Center Plate
P/N. 3AC-99701-0
Removing or installing propeller
shaft housing bearing
Shift Rod Joint Puller
P/N. 353-72248-0
Used for pulling up shift rod in case the components are
reassembled with the shift rod at "R" position in the gear case.
* This tool is not required when the components are assembled
with the shift rod at "F" position in the gear case.
Spring Pin Tool A
P/N. 369-72217-0
Removing spring pin
Vacuum/Pressure Gauge
P/N. 3AC-99020-0
Inspecting pressure
Driver Rod
P/N. 3AC-99702-0
Used in combination with center
place and various attachments
Piston Ring Tool
P/N. 353-72249-0
Removing or attaching piston
rings
Spring Pin Tool B
P/N. 369-72218-0
Installing spring pin
Compression Gauge
P/N. 3AC-99030-0
Measuring compression
pressure
Universal Puller Plate
P/N. 3AC-99750-0
Removing reverse (C) gear
bearing
TLDI 115A 2007