Installation Of Compressor Housing Ass'y - TOHATSU TLDI MD 115A SERIES Service Manual

11) Installation of Compressor Housing Ass'y

Attach dowel pins 2 to compressor cylinder 1.
1.
Install compressor housing ass'y 3 and gasket by using
2.
bolt 4.
Put crank pin into connecting rod big end and
install the assembly while shaking crank shaft a
little.
Compressor Housing Bolt 4 :
6N·m (4 lb·ft) [0.6kgf·m]
Install head 5, reed valve ass'y 6 and gasket 7 by using
3.
bolt 8.
Be careful of the orientations of reed valve ass'y
and gasket when installing them.
Degrease both mating faces of compressor
head gasket and valve seat gasket before
installing them.
Cylinder Head Bolt 8 :
9N·m (7 lb·ft) [0.9kgf·m]
TLDI 115A 2007
3
7
6
7
5
8
4
2
1
4
4-43