Optional Tools - AGFA DRYSTAR AXYS Service Manual

DD+DIS033 .07E
NOTE:
*As DT film used in the Drystar printers has a slightly different color compared to
conventional films, different densitometers give different density readings, depending
on the light source.
To make a correct density measurement use only a calibrated densitometer MacBeth
TR-924, X-Rite 331, X-Rite 341, X-Rite 301, X-Rite 310 or Gretag D200-2. Other
densitometers are not supported.
1.2

Optional tools

The optional tools are required in exceptional cases only.
Tool
Crossed network
cable
RS232 null-
modem cable for
the Service PC
(SUB D 9F/9F)
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
10-2007
Part Number
EB+72010270 or
commercially
available
EB+44160021
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Repair and Service
Tools and Auxiliary Means
Purpose
To get access to the printer homepage, in
case access via the hospital network is not
possible.
Note: Many service PCs as of approx. year
2006 do not require a crossed network cable:
They autodetect the type of connection (via
hub or point-to-point connection).
To get access to the printers terminal level.
Only required in exceptional cases for
troubleshooting (e.g. boot-up problems).
Agfa Company Confidential
Chapter 3.2 / 6