AGFA DRYSTAR AXYS Service Manual page 82

DD+DIS033.07E
13. When the film edge reaches
the output module, the CDM
checks "backside printing".
For details refer to section 3.1.
14. When printing is finished, the
cam drive opens the gap
between TH and drum.
15. The output rollers transport the
film out of the printer.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
06-2009
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Functional Description
Figure 12: CDM
Figure 13: Output Module
Agfa Company Confidentia
Chapter 2 / 12