AGFA DRYSTAR AXYS Service Manual page 142

DD+DIS033.07E
3.5.5.1 Example 1: Adaptation of the taste LUT (contrast)
Whenever the host with AE title 'CTSCAN200' sends a print job to the printer, the taste
LUT shall be adapted to 'Kanamori_like 200'.
(1) In the printer homepage select
'Service Engineer tools - Enter
service command session'
(2) Enter username and password
(3) Select 'DICOM profile editor'
(4) Select 'New'.
(5) In the host profile window select
'change' at the 'host profile
type', to see, whether the
connected host is part of the
hosts database.
Refer to Figure 34.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
10-2007
HOME
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Repair and Service
Tools and Auxiliary Means
Welcome to this
DryStar Axys printer
SERVICE TOOLS
General information
List of errors
Printer Infocounters report
DICOM, LPD and HIPAA report
QA Report Page
Software versions
Remote sessions
Show printer status
Enter key-operator command session
Enter service command session
Release remote command session
Connectivity tools
Scaling Setup
DICOM profile editor
LPD Profile Editor
Network configuration
Printqueue editor
Controller logging
Module repair
Modules
Figure 32
Figure 33
Agfa Company Confidential
536732et.cdr
Chapter 3.2 / 36