Machine Specific Tools; Mandatory Tools - AGFA DRYSTAR AXYS Service Manual

DD+DIS033.07E
1

Machine specific Tools

In addition to the conventional service tools which every service engineer has in his
toolbox, the following tools are required for service on the printer:
1.1

Mandatory tools

The mandatory tools are required for repair, troubleshooting or maintenance of the
printer.
Tool
Anti-static wrist strap
Cleaning tissue (box
of 50 pieces)
Densitometer*
Ink Eraser 'Pelikan'
Isopropyl Alcohol and
lint free cloth
Magnifying glass 8x
Service key
Standard ruler (1mm) Commercially available
Density Reproduction
Check files
Waterproof pen
CF card reader/writer
External CF-card
128 MB
Service PC
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
10-2007
Part Number
CM+9.9999.0830.0
CM+309931.0
To be bought locally
10+999991176.0
Commercially available
CM+9.9579.9904.0
CM+9.0426.6309.0
Density reproduction
check files are available
via MEDNET, GSO Library
commercially available
EB+72010600 (USB)
EB+72010160 (PCMCIA)
CM+343356.0
Commercially available.
See also 1.2.1 and 1.2.2
on page 5.
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Repair and Service
Tools and Auxiliary Means
Purpose
To avoid static discharges on
electronic components
For cleaning of the printer
To perform CDM calibration
For the 'dry TH cleaning'
procedure
To clean the TH
To check image quality of films at
the lightbox
To override the safety switch
For horizontal image adjustment
To check calibration of CDM
(internal printer densitometer)
To write on printed testfilms
To read/write CF-cards on a
Service PC via USB interface
To read/write CF-cards on a
Service PC via PCMCIA interface
To install and save software &
data.
To perform different service
actions (access to the printer
homepage; evaluate infocounter
etc.).
Agfa Company Confidential
Chapter 3.2 / 5