Table of Contents
Advertisement
Capacitor Kit d-lab.1
1
List of possibly affected machines
Only a few machines are affected. So it is necessary to check the capacitors before they are replaced.
All Print Engines with modification code „B06" or higher have already correct capacitors installed.
A list, sorted by serial number and country can be found at the end of this documentation (Chapter „Attachment").
2
Contents of the kit
– 2 capacitors 100uF/20V
– Solder wick
2.1
Additional tools
– Soldering iron (power max. 30W) with a thin bit
– ESD wrist band
– Heat sink compount
– Torch
– Pair of tweezers
– Socket wrench 5.0 mm and 5.5 mm
AGFA d-lab.1
CM+9.8072.9003.0/DD+18070312D0/PN04073_00
1
- Quick Links:
- Problem
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the d-lab.1 and is the answer not in the manual?
Questions and answers