AGFA DRYSTAR AXYS Service Manual page 300

Type 5367/100
Hide thumbs Also See for DRYSTAR AXYS:
Table of Contents

Advertisement

DD+DIS033.07E
2.4.1
Key-Operator - Change Image quality settings
Default film calibration
Default Densitometer
Accept changes Discard changes Reset Values
Key-Operator - Change Image quality settings
Accept changes Discard changes Reset Values
9.1
Choose Dataset
Proceed
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
10-2007
Welcome to this
DryStar AXYS printer
off
on
Macbeth TR924
Gretag
X-Rite 301
X-Rite 310
Welcome to this
DryStar AXYS printer
Select frequency
Every
packs
5
Welcome to this
DryStar AXYS printer
Key-Operator - Installation
Software Upgrade
1.
From CF-card
2.
From this Computer
Go back
Welcome to this
DryStar AXYS printer
Key-Operator - Installation
Before install.
please make backup
1.
OK, make backup
2.
SKIP backup
Go back
Welcome to this
DryStar AXYS printer
Key-Operator - Installation
Browse .....
Go Back
Reset Values
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Software Menus, Settings
3.1
DryStar AXYS printer
Key-Operator - Print image
1. Ktbwd2n.zip
2. smpte_kan.zip
3. smpte_l300.zip
4. smpte_lin.zip
5. tpa.zip
Go back
8.1
Key-Operator - Service actions
Data of last QC measuring
Date: 20-NOV-2004
Time: 09:01
Initials:
Max D: 3.1
DD: 0.2
Mid Density: 1.1
Base + Fog: 0.2
New reference:
Comment:
Accept changes Go Back
7.1
Key-Operator - Service actions
1.
Maintenance settings
2.
Pending maintenance actions
3.
Closed maintenance actions
Go back
Key-Operator - Service actions
MAINTENANCE SETTINGS
Reset Item
Thermal head cleaning required
Replace thermal head anti dust filter
Replace thermal head (end of life)
Film calibration upper tray required
Film calibration lower tray required
Service maintenance required
Go back
5367/100
Repair and Service
Welcome to this
Welcome to this
DryStar AXYS printer
yes
no
New QC measuring
Reset Values
Welcome to this
DryStar AXYS printer
Welcome to this
DryStar AXYS printer
Cycles to go Factory settings
4841
5000
24841
25000
62500
62500
40000
39841
500
5000
2333
5000
Chapter 3.7 / 10
Agfa Company Confidential

Advertisement

Table of Contents
loading

Table of Contents