Completion Of Installation; Customer Instruction - AGFA DRYSTAR AXYS Service Manual

DD+DIS033.07E
7

Completion of installation

The purpose of this section is to show the tasks that are required for customer
instruction and backup of printer settings.
The following table lists these tasks.
Task
Instruct the Customer in
operation of the printer
Save settings on backup
CF card
7.1

Customer Instruction

(1) Instruct the customer in following activities:
Activity
Switching on the printer: Warm up
time 7 min.
Switching off the printer. It can take
up to 20 secs. until the printer
switches off.
Loading films: RF tag and its
function.
Removing film jams.
Show dust stripes on a previous test
film and how to prevent:
•
Keep printer always closed.
•
Clean TH resistor line with
alcohol and lint free cloth when
dust stripes appear or when
printer displays "Printhead
cleaning required".
(2) Hand over the user and reference manual to the customer.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
06-2008
Controls, Connections, and Setup Procedures
Importance Accessible via ...
mandatory
mandatory Key-operator
Refer to User or Reference Manual ....
User manual: "Switching on the DRYSTAR
AXYS"
User Manual: "Switching off the DRYSTAR
AXYS".
User Manual: "Loading films".
Reference manual "Troubleshooting: Clearing
of film jams".
Reference manual "Troubleshooting Checklist".
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Details see...
--
menu
Agfa Company Confidential
7.1
X7.1
7.2
X7.2
Chapter 1 / 33