Installation Checklist - AGFA DRYSTAR AXYS Service Manual

DD+DIS033.07E
1

Installation Checklist

Purpose of the installation checklist:
•
•
NOTE:
The "DRYSTAR AXYS Plug & Play Installation Manual"
is part of delivery in English Language and can be downloaded on MEDNET,
HealthCare library.
# Step
Installation Prerequisites:
1. Check installation site prerequisites
2. Check shipment completeness
3. Prepare required tools
4. Unpack the printer
5. Install output tray
6. Remove transport protection locks
7. Connect the cables
Printer set-up:
8. Set film size tabs
9. China only: Stick Chinese warning
label above the existing one
10. Load films
11. Startup the printer
Printer Installation Wizard:
12. Go through printer installation wizard
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
06-2008
Controls, Connections and Setup Procedure
to give an overview of all steps, that are required for the installation of the
printer.
to provide a reference to the corresponding section of the "DRYSTAR
AXYS Plug & Play Installation Manual" (abbreviated: P&P) and
"Controls, Connections and Set Up Procedure" chapter where the topics
are further explained.
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
(Intranet Link
Task refer to ....
Code
INS P&P 5
INS Packing Slip
(Intranet Link
Extranet
INS P&P 1
INS P&P 2, 3, 4
INS P&P 6
INS P&P 7, 8, 9
INS P&P 10
INS P&P 11
INS P&P 12
INS P&P 13, 14
INS P&P 15
INS section
Agfa Company Confidential
/ Extranet Link)
Okay
/
Link)
2
X2 X
Chapter 1 / 4