Testimage Sti2 - AGFA DRYSTAR AXYS Service Manual

DD+DIS033.07E
3.3.2

Testimage STI2

Composed of several different test images to check most aspects of image quality.
Purpose
(1) In the browser pages select menu
Usage
'Service Engineer Tools - Enter
Service Command Session - 3
Print Testimage – 1 Test image -
STI2.ZIP'.
(2) The test image as displayed in
Figure 9 will be printed.
Evaluate the test image at the lightbox as
Evaluation
follows:
(1) Field 1 contains white and black
lines / dots of 1, 2 and 3 pixel width
Check: all lines / dots must be
visible
(2) Field 2 consists of a SMPTE
testimage. Refer to 3.3.3
(3) Field 3 consists of a flatfield with
Dmax 1.0
(4) Check: No stripes in horizontal or
vertical direction may be visible.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
10-2007
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Repair and Service
Tools and Auxiliary Means
Figure 9
Figure 10
Agfa Company Confidential
Chapter 3.2 / 18