Media Feed Support (Optional); Adjusting Parameters In The Queue During Printing; Editing A Job - AGFA Jeti Tauro H3300LED Series Operator's Manual

Media Feed Support (Optional)

Please refer to the

Adjusting Parameters in the Queue During Printing

In order to obtain the best print quality result, some of the print parameters
be adjusted during printing. These parameters are:
• Transport adjust (or step accuracy) which allows you to adjust a feed step, visible from an image
overlap or gap between swaths.
• Head gap which allows you to adjust the distance between the media and the print heads and can
be increased while printing to avoid collision. The value can be altered by entering a different value
in the value display box or by using the - and + buttons to increment or decrement the value dis-
played.
• Number of copies which can be added while printing.

Editing a Job

From the GUI, a currently open job can be edited in the layout detail pane using the Edit Layout button
(outlined in green in Fig. 5-29)
- This launches a client to the Asanti server. Refer to the Asanti documentation for details.
Agfa Graphics
media feed support manual.
.
Revision 1.0
Jeti Tauro H3300LED Operator Manual
Fig.5-28: Copies, Transport and Head Gap Adjustment During Printing
(outlined in red in Fig.5-28)
Fig.5-29: Edit Layout Button
Chapter 5
can
54