Modality Setup Parameters - AGFA DRYSTAR AXYS Service Manual

DD+DIS031.07E
NOTE:
Logical Printer Configuration to support printing for different applications:
It is possible to define more than one AE title at the printer – this means it's possible to
have two or more "logical" DRYSTAR AXYS printers.
To configure logical SCP printers can be necessary, in case for example printing is
initiated at a PACS system, which has several modalities as input.
Example:
The PACS system collects CR and CT images.
•
CR images shall be printed with taste LUT Kanamori
•
CT images shall be printed with linear taste LUT.
Problem:
The workstation at the PACS system has one AE title only. The DRYSTAR AXYS
does not recognize, for which type of modality (CR or CT) the user wants to print.
Solution:
•
Create one logical printer 'DRYSTARAXYS_CR' and one 'DRYSTARAXYS_CT'.
•
Create two different host profiles for the two logical printers, one with Kanamori
LUT, the other with linear taste LUT.
•
In the workstation setup both printers: The user has to select the proper logical
printer, depending on the application.
⇒ The number of logical SCP printers is limited. As each configured SCP server
consumes resources of the printer, use as little SCP servers as possible. Rule of
thumb: Define max. 4 logical printers.
6.2

Modality Setup Parameters

For setup of the modalities at the printer, the following parameters have to be collected
at the hospital network administrator:
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Edition 1, Revision 1
12-2007
Printed copies of this document are not controlled.
DRYSTAR AXYS
5367/100
Installation Planning
Chapter 11 / 13
Agfa Company Confidential
1 2 3