AGFA DRYSTAR AXYS Service Manual page 138

DD+DIS033.07E
3.5.4.1 Adaptation of the PC IP address
To connect the printer and the Service PC via network, usually the IP address of the
Service PC has to be adapted.
Basic rules:
Case 1: The service PC is part of the hospital network.
(1) Get the IP address and possibly the subnet mask* for the Service PC from the
hospital network administrator. In case the hospital network administrator wants
to have the Service PC working only in a subnet, get from him the netmask (also
called subnet mask).
(2) Enter IP address and subnet mask as displayed in Figure 26 to Figure 29.
Case 2: The service PC is not part of the hospital network, but connected via crossed
UTP network cable to the printer.
(1) Look up the printer IP address and subnet mask in the printer key operator menu
'show settings - Network'.
(2) Define an IP address for the Service PC by adding or subtracting '1' to the last
digit of the IP address.
Example:
(3) Enter IP address and subnet mask as displayed in Figure 26 to Figure 29.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
10-2007
Printer IP address = 10.6.5.121
Service PC address = 10.6.5.122 or 10.6.5.120
Figure 26
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Repair and Service
Tools and Auxiliary Means
Figure 27
Agfa Company Confidential
Chapter 3.2 / 32