Software Release 2.1.0_C2; New Feature Of Software 2.1.0_C2; Software Release 2.1.0_C3; New Feature Of Software 2.1.0_C3 - AGFA DRYSTAR AXYS Service Manual

DD+DIS033.07E
7

Software Release 2.1.0_C2

Type of new Software*
Release Date
Printer Serial Numbers
Availability
Prerequisites
* SNs of additional DRYSTAR AXYS printers with SW 2.1.0_C2 ex factory: 3177, 3394, 3396, 3397, 3400,
3401, 3404, 3405, 3407, 3409, 3410, 3411, 3413, 3414, 3415, 3416, 3420, 3421, 3423, 3424, 3425, 3427,
3428, 3430, 3431, 3432, 3433, 3435
*NOTE:
 A software upgrade is a functional extension. An update (software patch) is an
internal change designed to correct bugs, fix defects, or otherwise minor
improvements to performance without changing the software's basic design,
structure or functionality.
 On MedNet, GSO Library always the latest available software release can be
downloaded.
7.1

New Feature of Software 2.1.0_C2

Software 2.1.0_C2 supports new hardware (Devius module, Tyndal module, SATA
hard disk) for DRYSTAR 5302 and DRYSTAR AXYS, which was introduced
in Q IV 2010.

Software 2.1.0_C2 is downwards compatible, so it also supports the actual
hardware (Devil module, Themis/Thanos module, SCSI hard disk).
It replaces software 2.0.0_C3.

The new software has no other new features except support of new hardware.
NOTE:
Software 2.1.0_C2 supports DRYSTAR 5302 and DRYSTAR AXYS.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 3
03-2011
Software Releases and Patches
Software Upgrade
10/2010
≥ SN 3436*
MedNet, GSO Library
None
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Repair and Service
Chapter 3.8 / 16
Agfa Company Confidential