Solved Bug In Software 2.0.0_C2; Known Software Issue - AGFA DRYSTAR AXYS Service Manual

DD+DIS033.07E
5.2

Solved Bug in Software 2.0.0_C2

Symptom
Sporadically the printer stops boot-up with message "Error System Failure":

When pressing the ON/OFF switch the printer cannot be switched off.

Access via network is not possible (to reboot remotely).

After unplugging and reconnecting the mains cable the printer usually starts up
normally.
CPU Driver problem
Cause
Solution
Install software 2.0.0_C2 to prevent the problem.
5.3

Known Software Issue

Symptom
Login problems with the Firefox browser:
In some cases the login to the service web pages has to be repeated three times, until
login is successful.
Incompatibility with login script and Firefox browser in certain cases
Cause
Solution
Repeat the login up to three times until it is successful.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 3
03-2011
Software Releases and Patches
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Repair and Service
Chapter 3.8 / 14
Agfa Company Confidential