AGFA DRYSTAR AXYS Service Manual page 61

DD+DIS033.07E
Host Profile Adjustments for "small clear border" at Mammo printing:
Without Chest Wall Rotation
DICOM Host Profile Parameter
"Mammo CWR Rotation" = no (default)
"Image Orientation" = r0 (default)
Film 1
+
Same film tint for both films
-
Film overlap approx. 4 mm:
Fog of blank frame of film 1 adds in film 2
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
06-2008
Controls, Connections, and Setup Procedures
Print
Direction
Film 2
Lightbox
536401gq.cdr
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
DICOM Host Profile Parameter
"Mammo CWR Rotation" = yes
"Image Orientation" = r180
Print
Direction
Film 1
+
Film overlap approx. 2 to 4 mm only
-
Film tint depends on print direction:
Film 1 has slightly different color tint
if viewed from the side
Figure 17
Film 2
Rotate 180° before
hanging at the lightbox
1
2
Lightbox
536701gq.cdr
Chapter 1 / 25
Agfa Company Confidential