DD+DIS031.07E
6
System integration
The system integration comprises the following tasks:
Task
Network integration of the printer
Modality setup
Setup of security and privacy (optional)
Setup of the Agfatek Link Service Host
For each of these steps various parameters are required in advance. They can be
entered in the following tables:
6.1
Network integration parameters
To connect the printer to the hospital network, the following parameters are required by
the hospital network administrator:
Parameter
Printer IP address
Hostname
Subnet mask
Router IP address
Printer AE title*
Domain name
*two or more AE-titles can be configured at the printer. See note next page
The Hospital Network Administrator needs the following information about the printer:
Network connection
Transmission protocol
Image formats
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Edition 1, Revision 1
12-2007
Default
169.254.10.10
dsaxys
255.255.0.0
-
DSAXYS
-
RJ45 UTP, 1000 BaseT acc. to IEC601
DICOM Version 3.0; FTP, Telnet, HTTP, SNMP,
SMTP
DICOM
Printed copies of this document are not controlled.
DRYSTAR AXYS
5367/100
Installation Planning
Refer to
Value
.............................................
.............................................
.............................................
.............................................
.............................................
.............................................
Agfa Company Confidential
1
2
3
6.1
6.2
6.3
6.4
Chapter 11 / 12