AGFA DRYSTAR AXYS Service Manual page 446

DD+DIS033.07E
Term
Blue Based Film
Browser
Term
C
Calibration
Clear Based Film
COM1, COM2
CPU (Devil) Board
Term
D
DA Converter
DCE
Densitometer
Diagnostic Area
DICOM
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
10-2007
Short description
Film with a blue colored support layer.
The fog level of this film is approx. 0.2 O.D. See also "Clear
Based Film"
Application used for reading Internet pages. The commonly
used browsers are Microsoft Internet Explorer and Netscape
Navigator.
Short description
Process which determines a reproducible correlation
between input and output values.
Film with a transparent support layer.
The fog level of this film is approx. 0.15 O.D. See also "Blue
Based Film"
Names for the first two serial interfaces of a computer
Printed circuit board to control the main functions of the
printer, CPU.
Short description
Digital Analog Converter.
Data Communications Equipment.
Term out of the RS232 specification. DCE equipment sends
data on pin 3 and receives on pin 2. The RS232 interface
from modems or PC's is almost always DCE. To connect a
DCE with a DTE device, a standard RS232 cable is required.
To establish a DCE - DCE connection, respectively a DTE -
DTE connection a null- modem cable is required. See also
DTE.
Device used for measuring the optical density of the film.
This area on film which is is used by the printer for the actual
image sent from the modality. The diagostic area is smaller
than the adressable area, as the diagnosic area is
surrounded by a black frame.
Digital Imaging and Communication in Medicine.
A network protocol, which is wide spread in the medical
world, and used for interchanging text and images.
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Glossary
Chapter 12 / 4
Agfa Company Confidential