Executing The Printer Installation Wizard - AGFA DRYSTAR AXYS Service Manual

DD+DIS033.07E
2

Executing the Printer Installation Wizard

The purpose of this section is to show the most important settings of the printer during
installation via Installation Wizard.
Before the printer installation wizard can be started, the steps 1 to 11 of the Installation
Checklist (refer to section 1) have to be completed.
The Printer Installation Wizard guides step
by step through different parameters.
Figure 1
X
•
shows how to enter the Installation
Wizard.
•
lists the parameters which have to
be entered.
A more detailed description of the printer
Installation Wizard is available in the
DRYSTAR AXYS Reference Manual in
section 'Using the installation wizard'.
The Reference Manual
Extranet
available on MEDNET, HealthCare
Library. It is available in English Language
only.
* Modality Type is not shown when selecting "default profile" in the "Modality Brand" screen.
**See NOTE next page concerning "site data tool".
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
06-2008
Controls, Connections and Setup Procedure
beneath
(Intranet Link
Link) is part of delivery and
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
2 Printer Installation
Language
Date and Time
PRINTER IP-ADDRESS
NETMASK
ROUTER IP-ADDRESS
CALLED (Printer) AE_TITLE
Daily used modality name
Modality Brand
Modality Type*
CALLING (Modality) AE_TITLE
/
Preferred film type
Install Site Data**
Save configuration
Reset
Type 5367/100
Printer Installation Wizard
Key-operator
menu
9 Installation
5367_Reg01_001_e.cdr
Figure 1
Agfa Company Confidential
Chapter 1 / 6