Activating The Mammo License - AGFA DRYSTAR AXYS Service Manual

DD+DIS033.07E
3.6

Activating the Mammo License

NOTE:
The Mammo License is optional. In case the customer did not buy the Mammo license,
skip this step.
Accessible via menu:
Purpose of the setting:
Default value:
Example browser
screen:
NOTE:
When the Mammo license is activated, the printer changes following characteristics:
•
It is possible to define DICOM host profile parameter "Mammo Modality = yes".
•
It is possible to use and calibrate DRYSTAR DT2 Mammo films
(Dmax up to 3.8 O.D).
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
06-2008
Controls, Connections and Setup Procedure
Browser Pages: Service Engineer Tools - Licenses
Activation of the Mammo License
Mammo not activated
HOME HELP
Product options:
MAMMO
Changes require reboot!
HOME HELP
Please enter the product
key to activate MAMMO:
OK
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Licenses
Activate
NOT ACTIVATED
Licenses
Cancel
5364enc10.cdr
Figure 8
Agfa Company Confidential
Chapter 1 / 14