Testimage Sti1 - AGFA DRYSTAR AXYS Service Manual

DD+DIS033.07E
3.3.1

Testimage STI1

Composed of many different test images to check all aspects of image quality.
Purpose
(1) In the browser pages select menu
Usage
'Service Engineer Tools - Enter
Service Command Session - 3
Print Testimage – 1 Test image -
STI1.ZIP'.
(2) The test image as displayed in
Figure 7 will be printed.
Evaluate the test image at the lightbox as
Evaluation
follows:
(1) Field 1 contains a continuous grey
wedge from grey value 0 to 255.
Check: no single grey steps may
be visible (in case single grey steps
are visible, this is called
'contouring'. The naming for this
effect is derived from the contour
lines in a hiking map).
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
10-2007
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Repair and Service
Tools and Auxiliary Means
Figure 7
Figure 8
Agfa Company Confidential
Chapter 3.2 / 16