Printer - Modality Connection; Modality Set-Up - AGFA DRYSTAR AXYS Service Manual

DD+DIS033.07E
5

Printer - Modality connection

The purpose of this section is to show the tasks that are required for connection of the
printer to the modality.
The following table lists these tasks.
Task
Let the modality be
set-up
Set-up logical printers
Print diagnostic and/or
test images
Adjust image settings
5.1

Modality set-up

(1) Let the modality be set-up at the modality.
(2) Tell the modality service engineer following printer parameters:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
06-2008
Controls, Connections and Setup Procedure
Importance
mandatory
optional
mandatory
optional
• Printer Type (Agfa DRYSTAR AXYS)
• IP address
• AE-title
• Available film formats.
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Accessible via * ...
--
Browser pages
--
Key-operator menu and
Browser pages
Agfa Company Confidential
Details see...
5.1
X5.1
5.2
X5.2
5.3
X5.3 X
5.4
X5.4
Chapter 1 / 18