AGFA DRYSTAR AXYS Service Manual page 298

DD+DIS033.07E
1
Welcome to this
DryStar AXYS printer
Key-Operator - Show settings
1. General
2. Input tray
3. Network (DICOM)
4. Image quality
5. Logical Printers
6 Installed datasets .
Go back
3
Welcome to this
DryStar AXYS printer
Key-Operator - Print Image
1. Test Image
2. From Printer Flash Card
3. From Remote Computer
Go back
5
Welcome to this
DryStar AXYS printer
Key-Operator - Restore configuration
1. From CF-Card
2. From Remote Computer
3. Frm dd/mm/yy hh:mm
Go back
7
Welcome to this
DryStar AXYS printer
Key-Operator - Service actions
1. Error Messages
2. Warning Messages
3.
Repair history
4. Maintenance
5. Resistor Check
6. Print infocounters
7. Horizontal alignment
Go back
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
10-2007
2
Key-Operator - Change settings
Go back
4
Key-Operator - Save configuration
3.1
1. To Printer Flash Card
2. To this Computer
Go back
6
Key-Operator - Calibration
1. Film Calibration
2. Therm. Head clean
Go back
8
Key-Operator - Quality Control
1. Quality Control
7.1
Go back
9
Key-Operator - Installation
1. New Software Installation
2. Printer Installation Wizard
Go back
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
5367/100
Repair and Service
Software Menus, Settings
Welcome to this
DryStar AXYS printer
2.1
1. General
2. Input tray
2.2
3. Network (DICOM)
4. Image quality
2.3
2.4
Welcome to this
DryStar AXYS printer
Welcome to this
DryStar AXYS printer
Welcome to this
DryStar AXYS printer
8.1
Welcome to this
DryStar AXYS printer
9.1
Agfa Company Confidential
see page 9
Chapter 3.7 / 8