AGFA DRYSTAR AXYS Service Manual page 145

DD+DIS033.07E
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
10-2007
HELP
Host Profile: Name XYZ
These are the default settings for all print jobs coming from the host
(modality) specified under 'Calling AE title'.
The values may be overloaded at run-time by the Dicom input.
You can prevent this by checking the checkboxes at the left side.
Name XYZ
Nick Name:
Use this profile only for incoming 'Calling AE title':
Use this profile only for local SCP server:
Host Profile type: GENERIC-GENERIC
Number of Copies:
Print Priority: low
Polarity:
normal
Film Orientation:
portrait
Trim: no
Film Size ID:
Medium Type:
Print even if Film Size ID/Medium type not supported:
Print even if Application type not supported:
Kernel:
site
Edit Custom
Magnification: Magn: max
Edit
Decimate/Crop behaviour :
Pixel Size:
Edit
Perception LUT:
kanamori
Kanamori Like value:
Custom value:
Illumination (cd/m2):
Reflected Ambient Light (cd/m2):
Border Density (OD x100):
Empty Image Density (OD x100):
Minimum Density (OD x100):
Maximum Density (OD x100):
Header Annotation:
Contents: none
Edit Custom
Font:
site
Edit Custom
Footer Annotation:
Contents:
none
Edit Custom
Font:
site
Edit Custom
Window (%):
Level (%):
Image Orientation:
r0
Conformance/Status Level:
off
Nevent enabled:
site
Mammo modality:
Mammo CWR Rotation: NO
Association Timeout (s):
Image Timeout (s):
Allow IMPLICIT VR LITTLE ENDIAN:
Allow EXPLICIT VR LITTLE ENDIAN:
Allow EXPLICIT VR BIG ENDIAN:
Resolution: 508
Supported SOP classes: Edit
LR like:
off
OK Cancel Show Defaults
Manually customized items are show in red
The last received input values are show in blue (click 'Show Last Input' button)
DOCUMENT CONTROL NOTE:
DRYSTAR AXYS
Type 5367/100
Repair and Service
Tools and Auxiliary Mea
Host AE
all
Change
yes
no
Interpolation Type cubicHighRes,
smoothFactor: -0.7
disabled
ratio: 1.0 / 1.0
site
300
0
site
Show last Input
Figure 36
ns
5367_Reg01_009_e.cdr
Chapter 3.2 / 39
Agfa Company Confidential