AGFA DRYSTAR AXYS Service Manual page 427

Type 5367/100
Hide thumbs Also See for DRYSTAR AXYS:
Table of Contents

Advertisement

DD+DIS031.07E
Many modalities have been tested with the printer. For several of the tested modalities
specific parameters have to be set at the printer. This is documented in the
"Connectivity Release Document".
IMPORTANT:
(1)
Check via Interface Status Report, whether the modality which shall print at the
Drystar Axys is tested and released.
(2)
If a connectivity release document for the modality – printer connection exists,
read this document before installation.
NOTE concerning Interface Status Report and Connectivity Release Documents:
The up-to-date interface status report lists all modalities, for which the connectivity to
any Agfa HealthCare device is tested and released.
The ISR (Interface Status Report) is available on MEDNET - HealthCare Library -
General Info - Connectivity & Application - To Agfa - Application Info - Agfa
ISRxyz.pdf (only via Intranet – not via Internet).
The ISR also lists the Connectivity Release Document numbers.
Example see Figure 6
PHILIPS, CR
Connectivity Release Documents:
Specific connectivity information for the DRYSTAR AXYS can be found in the
Connectivity Release Documents.
The Connectivity Release Documents are available on MEDNET (Intranet and
Internet), Imaging Library - General Info - Connectivity & Application
Not all modalities that are tested for Drystar 4500 (M)/ 5500 / 5503 / 5300 / 5302 are
also tested for Drystar AXYS. As the controller part for all printers is more or less
identical, except behaviour regarding film sizes and output tray, modalities that are
tested for Drystar 4500 (M)/ 5500 / 5503 / 5300 / 5302 can also be connected to
Drystar AXYS.
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Edition 1, Revision 1
12-2007
EASYVISION RAD 4.2
Printed copies of this document are not controlled.
DRYSTAR AXYS
DRYSTAR 4500(M)/5500/5300
Image :
ETHERNET II
DICOM 3.0
Control :
ETHERNET II
DICOM PRINT MANAGEMENT SCU
Status :
Released for installation
Document :
000
Remarks :
Figure 6
5367/100
Installation Planning
874
5365_reg11_006_e.cdr
Connectivity Release
Document Number
Chapter 11 / 15
Agfa Company Confidential
1
2
3

Advertisement

Table of Contents
loading

Table of Contents