Show Snmp Host - D-Link DGS-3000 Series Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
Example
To delete SNMP host "10.0.0.1":
DGS-3000-26TC:admin#delete snmp host 10.0.0.1
Command: delete snmp host 10.0.0.1
Success.
DGS-3000-26TC:admin#

69-15 show snmp host

Description
This command is used to display the recipient for which the traps are targeted.
Format
show snmp host {<ipaddr>}
Parameters
<ipaddr> - (Optional) Enter the IP address of the recipient for which the traps are targeted.
If no parameter specified, all SNMP hosts will be displayed.
Restrictions
None.
Example
To show SNMP host:
DGS-3000-26TC:admin#show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address SNMP Version
--------------- ---------------
10.90.90.3
10.90.90.2
10.90.90.1
10.90.90.4
10.90.90.5
Total Entries : 5
DGS-3000-26TC:
Community Name / SNMPv3 User Name
---------------------------------
V3 noauthnopriv initial
V2c
V1
V3 authnopriv user123
V3 authpriv user234
private
public
611