Disable Cfm; Config Cfm Ports - D-Link xStack DGS-3420 Series Reference Manual
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
14-11 disable cfm
Description
This command is used to disable the CFM globally.
Format
disable cfm
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the CFM globally:
DGS-3420-28SC:admin#disable cfm
Command: disable cfm
Success.
DGS-3420-28SC:admin#
14-12 config cfm ports
Description
This command is used to enable or disable the CFM function on a per-port basis. By default, the CFM
function is disabled on all ports. If the CFM is disabled on a port:
1. MIPs are never created on that port.
2. MEPs can still be created on that port, and the configuration can be saved.
3. MEPs created on that port can never generate or process CFM PDUs. If the user issues a Loopback
or Link trace test on those MEPs, it will prompt the user to inform them that the CFM function is
disabled on that port
Format
config cfm ports <portlist> state [enable | disable]
198
Advertisement
Table of Contents
