Disable Cfm; Config Cfm Ports - D-Link DGS-3000 Series Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
Example
To enable the CFM globally:
DGS-3000-26TC:admin#enable cfm
Command: enable cfm
Success.
DGS-3000-26TC:admin#

16-11 disable cfm

Description
This command is used to disable the CFM globally.
Format
disable cfm
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the CFM globally:
DGS-3000-26TC:admin#disable cfm
Command: disable cfm
Success.
DGS-3000-26TC:admin#

16-12 config cfm ports

Description
This command is used to enable or disable the CFM function on a per-port basis. By default, the
CFM function is disabled on all ports.
If the CFM is disabled on a port:
1. MIPs are never created on that port.
2. MEPs can still be created on that port, and the configuration can be saved.
3. MEPs created on that port can never generate or process CFM PDUs. If the user issues a
Loopback or Link trace test on those MEPs, it will prompt the user to inform them that the
CFM function is disabled on that port.
158