Single Ip Management (Sim) Commands - D-Link DGS-510 Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide

64. Single IP Management (SIM) Commands

64-1 sim
This command is used to enable single IP management. The no form of this command disables single
IP management.
sim
no sim
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to enable the single IP management function of the device and the no form of the
command to disable the single IP management function of the device.
Example
This example shows how to enable single IP management.
Switch# configure terminal
Switch(config)# sim
Switch(config)#
64-2 sim role
This command is used to configure the device's single IP management role from Candidate to
Commander or from Commander to Candidate.
sim role {commander [GROUP-NAME] | candidate}
Parameters
commander
GROUP-NAME
candidate
Default
By default, the single IP management group name is "default".
By default, the Switch role is candidate.
Specifies to configure the device to Commander switch.
(Optional) Specifies to assign a name for the group when
configuring the device to the Commander mode.
Specifies to configure the device to Candidate switch.
589