Configuring Poe Power Mode Using Edm - Avaya 3500 Series Getting Started

Configuring PoE power mode using EDM

The ERS 3510GT-PWR+ switch is able to operate in two Power over Ethernet (PoE) budget modes:
• Fanless mode — Low Power Budget Mode
• Normal mode — High Power Budget Mode
The default is: High Power Budget Mode (Normal mode, fan operates).
In Fanless mode, the fan is shut down and will not be activated, despite the internal temperature. To
prevent the switch from overheating, the PoE budget is limited to 60 Watts. Although the internal
temperature may show as High in this mode, the ERS 3510GT-PWR+ switch has been designed to
operate at internal temperatures above 60°C. When the switch is operating in Fanless mode,
diagnostic fan tests are not performed.
In Normal mode, the fan operates normally and is activated when the temperature reaches its
threshold. See Managing switch PoE using EDM
not limited; a maximum of 170 Watts is available.
Use this procedure to set the PoE power budget mode.
Procedure
1. In the navigation tree, double-click Power Management .
2. Click PoE.
3. In the work area, click the Power Mode tab.
4. Perform one of the following:
• To enable Low Power Budget Mode and disable fan operation, select the
lowPowerBudget checkbox.
OR
• To enable High Power Budget Mode and enable fan operation, select the
highPowerBudget checkbox.
5. On the toolbar, click Apply.
Power Mode tab field descriptions
The following table describes the fields on Power Mode tab.
Name
PoEPowerMode
July 2015
on page 148. In Normal mode, the PoE budget is
Description
Lets you set the power budget mode for switch to be
either:
• lowPowerBudget: Sets the switch PoE budget to
Comments on this document? infodev@avaya.com
Configuring PoE power mode using EDM
60W max and disables fan operation (Fanless
mode).
Getting Started with Avaya ERS 3500 Series
151