Default Edm Username And Password; Edm Help File; Device View - Avaya 8800 User Interface Fundamentals

Important:
You cannot open two HTTP sessions from the same IP address to the same switch using
the same browser. To open two simultaneous sessions to the same switch, you must open
one session in Internet Explorer and another in Firefox.

Default EDM username and password

For EDM access, the default username and password combination is admin/password.
Important:
If you have configured a username and password for Web server access in a previous
release, these configured values remain unchanged. To access EDM, use these previously
configured username and password values. In this case, the default values do not apply.

EDM help file

While the EDM GUI is bundled with the Ethernet Routing Switch 8800/8600 software, the
associated EDM help files are not. To access the help files from the EDM GUI, you must install
the EDM help files on a TFTP or FTP server in your network. For more information, see
Installing EDM help files

Device view

When you access EDM, the first screen displays a real-time physical view of the front panel of
a device as shown in the following figure. From the front panel view, you can view configuration,
and performance information for the device, a module, or a single port. This view is always
available to you by clicking on the Device Physical View tab above the device view.
User Interface Fundamentals
on page 56.
Enterprise Device Manager
July 2013 17