VLAN configuration
3. To remove a VLAN, enter:
Verifying VLANs
After configuring a VLAN, use the procedure in this section to verify successful operation of a
VLAN and to verify the interfaces to which the VLAN is assigned.
Procedure steps
To verify the successful configuration of a VLAN, enter:
show bridge vlan
Shutting down a VLAN interface
Use the procedure in this section to shut down a VLAN interface.
Procedure steps
1. To access configuration mode, enter:
2. To select a VLAN interface, enter:
3. To shut down the interface, enter:
Configuring multiple IP Helper addresses on a VLAN
Use the following procedure to configure IP Helper addresses on a VLAN.
Procedure steps
1. To configure IP Helper addresses, enter Configuration Mode.
2. To configure an interface, enter Interface Mode.
116
Configuration — Layer 2 Ethernet
vlan database
no vlan <vid> [name <WORD>]
configure terminal
interface vlan vlan<id>
shutdown
configure terminal
Comments? infodev@avaya.com
July 2013