SSANGYONG 1999 Musso Service Manual page 1447

9U-10 CONTROL UNITS AND SYSTEM
STICS
STICS, electonic control warning device, controls 16 functions and contains the self diagnostic function detecting any
malfunctions in the sensors and load.
1 STICS Unit
2 STICS Connector
Removal & Installation Procedure
1. Disconnector the battery negative cable.
2. Unscrew 4screw from center console box.
3. Remove the center console box and disconnect 3 STICS
connectors.
4. Unscrew 3 fastening bolts and remove the STICS unit.
5. Installation should follow the removal procedure in the
reverse order.
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
3 STICS Unit Fastening Bolt
4 Parking Brake Lever