Defect Codes - SSANGYONG Musso Sports N100 2003 Manual

DEFECT CODES

Defect Code
Normal
01
Defective ECU
02
03 Front/left Wheel Speed
Sensor (Wire)
Front/right Wheel Speed
04
Sensor (Wire)
05 Rear/left Wheel Speed
Sensor (Wire)
Rear/right Wheel Speed
06
Sensor (Wire)
07 Front/left Wheel Speed
Sensor (Signal)
Front/right Wheel Speed
08
Sensor (Signal)
Application
ANTILOCK BRAKE SYSTEM 4F-13
Description
-
Replace the ECU
Check resistance of the wheel speed sensor :
l
1.280KΩ - 1.920KΩ
Check wire for ground and open.
l
Replace the sensor.
l
Check resistance of the wheel speed sensor :
l
1.280KΩ - 1.920KΩ
Check wire for ground and open.
l
Replace the sensor.
l
Check resistance of the wheel speed sensor :
l
1.280KΩ - 1.920KΩ
Check wire for ground and open.
l
Replace the sensor.
l
Check resistance of the wheel speed sensor :
l
1.280KΩ - 1.920KΩ
Check wire for ground and open.
l
Replace the sensor.
l
Check wire for ground and open.
l
Check connection of the wheel speed sensor connec-
l
tor and ECU side connector.
Measure air gap between wheel teeth and wheel speed
l
sensor and check installation of wheel tooth.
(Standard air gap : 0.35 - 1.60 mm)
Check output voltage of the sensor by rotating the
l
wheel 1/2 - 1 revolution per second and shaking sen-
sor wire.
- When measured by multi - meter (AC) :
output voltage > 70 mV
- When measured in oscilloscope :
output voltage ≥ 120 mV/P-P
Replace the sensor.
l
Check wire for ground and open.
l
Check connection of the wheel speed sensor. con-
l
nector and ECU side connector.
Measure the air gap between wheel teeth and wheel
l
speed sensor and check installation of wheel tooth.
(Standard air gap : 0.35 - 1.60 mm)
Check output voltage of the sensor by rotating the
l
wheel 1/2 - 1 revolution per second and shaking sen-
sor wire.