SSANGYONG 1999 Musso Service Manual page 1296

7B/C-22 MANUAL & SEMIAUTO-HVAC
Removal & Installation Procedure
1. Disconnect the negative(-) terminal from the battery.
2. Discharge refrigerant from the system.
Notice
By connecting a manifold gauge connection hose to High/
Low pressure line, discharge the refrigerant.
3. Disconnect the high / low pressure pipe and wire connectors.
Installation Notice
Tightening Torque
Notice
Before tightening, apply the compressor oil to O-ring.
4. Remove the mounting bolt from the compressor bracket
and remove compressor assembly.
Notice
Place the removed compressor in vertical position.
Installation Notice
Tightening Torque
5. Installation should follow the removal procedure in the
reverse order.
20 - 30 Nm
21 - 26 Nm