SSANGYONG 1999 Musso Service Manual page 1397

Installation of Side Glass
For installation, refer to 'Installation of Windshield'.
1. Clean as the same procedure of windshield mounting flange
(Apply primer).
Clean as the same procedure of windshield cleaning,
however keep 20mm from the edge of glass.
2. Apply primer to the side glass.
Use sufficiently mixed primer in a mixer over 10 minutes.
Be careful not to contaminate other parts due to over
application.
Duration : 1 minute - 24 hours (reapply after 24 hours).
Never use the primer containing deposits or floating
materials.
Do not apply primers which is over its duration.
Do not reuse a gauze over 20 times.
Apply evenly to glass.
3. Apply seaant to the side glass.
Turn over the glass and apply sealant.
Uneven application of sealant may cause water leakage
after installation of the glass.
GLASS AND MIRRORS 9L-7