Standard Bin Elevator Drive Removal - Lexmark CX825 Service Manual

11
Remove the two screws (C), disconnect the cable (D), and then remove the transmitter sensor.

Standard bin elevator drive removal

1
Remove the MSHPF front door. See
2
Remove the MSHPF front left cover. See
3
Remove the MSHPF door hinge. See
4
Remove the knobs J2 and J7. See
5
Remove the MSHPF inner front cover. See
6
Disconnect the cable (A), and then remove the E-clip (B).
C
"MSHPF front door removal" on page
"MSHPF front left cover removal" on page
"MSHPF door hinge removal" on page
"Knobs J2 and J7 removal" on page
"MSHPF inner front cover removal" on page
Repair information
1012
D
912.
916.
915.
914.
917.
7564