Calibrating Image Color; Two-Sided Color Scanning Calibration - Fuji Xerox Color C60 System Administrator Manual

6. Touch Save > Close.

Calibrating Image Color

Note
Performing this calibration process affects only those jobs printed at the internal
controller. It will not apply to jobs coming from the DFEs.
When color gradation of a printed image shifts, you can use the Calibration feature at
the Control Panel to calibrate the color of the image and maintain quality of the output
at a certain level:
To calibrate image color:
1. At the printer Control Panel, log in as Administrator, press the Machine Status
button, and touch the Tools tab.
2. Select Common Service Settings > Image Quality Adjustment > Calibration.
Read the directions on the Control Panel and follow the steps.
3. From the Calibration screen, select the Screen Type to calibrate.
Note
For optimal color, calibrate all four screen types.
4. Load A3, A4, 11" x 17" or 8.5" x 11" and choose the desired Paper Supply.
5. Select Start on the screen to print the calibration chart for the color correction.
6. Continue following the steps on the Control Panel.
7. To perform calibration, place the calibration chart face down with both magenta
patches against the left edge of the document glass.
8. Place 5 sheets or more of blank white paper over the chart to prevent light from
bleeding through the sheet.
9. Lower the document glass and select Start on the screen.
10. Select Confirm.
11. Select Target and specify whether the calibration should impact Copy and Print
jobs, Copy Jobs Only, Print Jobs Only, or None.
12. Touch Save
13. Continue calibrating another screen type or touch Close.

Two-Sided Color Scanning Calibration

To calibrate two-sided color scanning:
Xerox ® Color C60/C70 Printer
System Administrator Guide
Image Quality and Calibration
4-3