Replacing The Front Panel Module - Fujitsu PRIMERGY CX122 S1 Service Supplement Manual

Replacing the front panel module

Ê Secure the server cover with two screws on the server rear (M3 x 4.5 mm,
C26192-Y10-C67).
Ê Reinstall the server in the system unit as described in
PRIMERGY CX122 S1 server in the system unit" on page
4.2 Replacing the front panel module
Ê Open the server as described in
34
The pre-assembled front panel
module consists of the operating
panel board and the operating
panel holder including controls
and LED indicators.
Part number:
A3C40114973
section "Opening the server" on page
Service Supplement
section "Installing a
21.
31.
PRIMERGY CX122 S1